Feed pellet is a feed processing equipment which directly compresses corn, soybean meal, Straw, Straw, Rice Husk, etc. INTO GRAIN Widely used in large, medium and small livestock farms, farms, feed processing plants, such as individual farmers.
pellet feed by feed mill machine
In the production of livestock and poultry pellet feed (except Ruminantia pellet), the requirements for raw material are mainly energy and protein, the content of Olein in the fiber is less, the pressing pellet is easier, and the granulation process is simpler.
The purpose of conditioning is to increase the heat and humidity of the material In order to facilitate the subsequent extrusion process in the fast maturation of the material.
pellet feed mill
At present, the oil addition in the production of animal pellet feed in China is generally carried out in a mixer, but the amount added does not exceed 3 %, otherwise, it will affect pelleting. If the amount of oil added is more than 3 %, the liquid feed such as oil, vitamins should be sprayed on the exceptional surface to reduce the loss of vitamins in the granulation process, so the oil spraying process should be increased.
When the machine is shut down, the grease adding pipeline shall not keep the grease, so as not to block the pipeline after the grease solidifying.
In order to improve the feed conversion rate of some livestock and poultry, the maturation rate of the feed components of hard pellets during pelleting process is only about 30% Some raw materials of energy and protein need to be extruded to ripen, so that the rate of ripeness of raw materials after extrusion is over 90% , and then after crushing, blending, mixing and Pelletizing, as a result, a combined process of extrusion ripening and hard granules was formed.
When working, the matching powder in the granulating bin is conveyed to the modulator by the screw feeder, and at the same time, the steam, grease, and stirring are added to mix, and the granulation is fed into the granulator for granulation after the wet-heat conditioning treatment.
In order to control the material feed and continuous uniformity, to ensure that the granulating machine main motor in the normal work within the rated load, the feeder is generally used stepless speed, into the granulator is evenly
distributed between the Roller Finally, the strip-shaped cutter is continuously extruded from the die hole and cut into a certain length by a fixed cutter installed on the outside of the die.
Under normal conditions, the feed granulator is usually composed of a hopper, a feeder, a security magnet, a stirring conditioner (with a ring mold, etc.), a press room, an enclosure, an overload protection device and an electrical control system.
flow chart for feed mill plant
The pelleting equipment has the advantages of simple structure, wide adaptability, small area, low noise, high hardness, smooth surface and inner maturation, which can improve the digestion and absorption of feed nutrition.
Choose the Reliable Manufacturer, Get the Successful Business!
Becca Lu
We are on WhatsApp +86 153 7309 2014.
www.chinafeedmill.com
Leave A Comment